Commercial reverse osmosis discharge brine solutions for ZLD from 50 GPD, up to 144,000 GPD.
Pounds of Salts and Solids per 1 Million U.S. Gallons of Water Desalinated, Based on ppm/tds

    Type of Brine Solution
    ppm 
    Pounds of Salt 
    Brackish
    1,000
    8,335
    Brackish  
    5,000
    41,679
    Highly Brackish 
    15,000
    125,038 
    Saline  
    30,000
    250,076 
    Sea Water 
    40,000
    333,435 
    Brine 
    300,000+
    2,500,764 
     
For more information email sundragonsaltfactory@yahoo.com
Phone 561.271.8131
 
 

Vapor Compression Water Distillers

60,000 gpd - 360,000 gpd trailer-mount vapor compression unit with generators

Zero liquid discharge tanks for settling hyper-saline brines at super saturation

Frac water and municipal wastewater solutions

Compression of Brine Waters for Supersaturation using MPI Vapco Vapor Compressors

        Equipment required:
        10,000 gpd vapor compressor
        1000 gallon recycle tank
        500 gallon brine tank
        Useful information
        1 cubic foot water = 7.48 gallons
        1 gallon water = 8.34 pounds
        1 cubic foot of water weighs approximately 62pounds
        1 cubic foot of concentrated solids to 5% moisture weighs approximately 100 pounds
        Sand w/ Gravel, wet = 125 pounds per cubic foot
        Sand w/ Gravel, dry = 108 pounds per cubic foot
         
        10,000 gpd at 1000ppm = 8,340 pounds solids per 1,000,000,000 gallons (83.4 pounds of solids per 10,000 gallons).
        A 10,000 gpd vapor compressor generates 9,000 gallons of distilled water and 1,000 gallons of reject brine water at 10,000 ppm if the influent is 1,000 ppm.
         
        This 1,000 gallons of 10,000 ppm reject water must be compressed , yielding 900 gallons of distilled water and 100 gallons of reject brine at 100,000 ppm (84 pounds).
         
        900 gallons of 10,000 ppm reject brine should be added to the 100 gallons of 100,000 ppm reject brine water in the 1,000 gallon tank, producing 1000 gallons of reject brine water at 15,000 ppm (approximately 150 pounds solids).
         
        The 1000 gallons of reject brine water at 15,000 ppm will be compressed to 100 gallons of 150,000 ppm reject brine.
         
        900 gallons of 10,000 ppm reject brine should again be added to the 100 gallons of 150,000 ppm reject brine (approximately 225 pounds solids) This batch should be compressed and stored in the 500 gallon brine tank for solids recovery.
         
        The final reject brine is at 210 degrees Fahrenheit and will cause rapid evaporation. Supersaturation may be achieved with no additional heat.

 

Zero Liquid Discharge Vapor Compression Distillers

Vapor Compression Distillation Systems

 

commercial reverse osmosis the largest selection of commercial reverse osmosis systems from 50 GPD all the way up to 144,000 GPD. ANYWHERE!

(Formerly called Titan manufactured by R.O. UltraTec. On January 1st, 2011, R.O. UltraTec changed their name to AXEON Water Technologies.)

BT-Series Reverse Osmosis Systems have been engineered for capacities ranging from 1500-2000 gallons per day and feed water up to 2000 TDS.

BT-Series Reverse Osmosis Systems are designed for overall high performance, high recovery rates, minimal energy consumption and offer great savings with low maintenance and operation costs.

BT-Series Reverse Osmosis Systems feature a compact space saving expandable design, excellent pre-filtration, quality components and allow for many options and upgrades to suit most applications.

Benefits:

* Fully Equiped and Customizable
* Expandable & Lightweight Design
* Compact Space Saving Design
* Components Easily Accessible
* Pre-Plumbed, Wired & Assembled
* Factory Tested & Preserved
* Low Operation Costs
* Low Maintenance Costs
* Easy Maintenance & Servicing
* CE Compliant
* 1-Year Limited Warranty
* Made in the U.S.A.

Features:

* Manual On/Off Control Switch
* White Powder Coated Aluminum Frame
* 5 Micron Sediment Pre-filter
* 10 Micron Carbon Block Pre-filter
* Single O-Ring Filter Housings
* Fluid-O-Tech™ Brass Rotary Vane High Pressure Pump
* ODP High Efficiency Carbonator Motor
* AXEON® HF1 Low Energy Membranes
* AXEON® PVC Membrane Housings
* Permeate Flow Meter
* Concentrate Flow Meter
* Feed Low Pressure Switch
* Feed Solenoid Valve with Manual Bypass
* 316 Stainless Steel Concentrate Valve
* 0-300 psi Pump Pressure Gauge
* 0-100 psi Prefilter Pressure Gauges
* John Guest® Push/Pull fittings with Locking Safety Clips

    Options & Upgrades:
    * AXEON® HF4 Extra Low Energy Membranes
    * AXEON® NF3 Nanofiltration Membranes
    * AXEON® NF4 Nanofiltration Membranes
    * Stainless Steel Pressure Vessels
    * Concentrate Recycle Valve with Flow Meter
    * HM Digital™ PS-100 TDS Controller
    * HM Digital™ PS-202 Dual TDS Controller
    * HM Digital™ PSC-150 TDS/Conductivity Controller
    * Fluid-O-Tech™ Stainless Steel Rotary Vane Pump
    * Minitrol Computer Controller
    * Minitrol IF Computer Controller with Feed Flush
    * S150 Computer Controller with Feed Flush
    * High Pressure Tank Switch
    * Chemical Pump Outlet
    * Blending Valve
    * Permeate Flush with Pressure Tank
    * Permeate Flush with Atmospheric Tank
    * Permeate Flush with mechanical Float
    * Permeate Sample Ports
    * Single Wood Crate

 

Flexeon™ 40000 GT-Series Reverse Osmosis System - Standard Model GT-40000

(Formerly called Titan manufactured by R.O. UltraTech. On January 1st, 2011, R.O. UltraTech changed their name to AXEON Water Technologies.)

GT-Series Reverse Osmosis Systems have been engineered for capacities ranging from 30000-40000 gallons per day and feed water up to 2000 TDS.

GT-Series Reverse Osmosis Systems are designed for overall high performance, high recovery rates, minimal energy consumption and offer great savings with low maintenance and operation costs.

GT-Series Reverse Osmosis Systems feature a compact space saving expandable design, excellent pre-filtration, quality components and allow for many options and upgrades to suit most applications.

Benefits:

* Fully Equiped and Customizable
* Expandable & Lightweight Design
* Compact Space Saving Design
* Components Easily Accessible
* Pre-Plumbed, Wired & Assembled
* Factory Tested & Preserved
* Low Operation Costs
* Low Maintenance Costs
* Easy Maintenance & Servicing
* CE Compliant
* 1-Year Limited Warranty
* Made in the U.S.A.

Features:

* Rotrol II Computer Controller
o LCD Display
o Pre-treatment Lockout
o Tank Level Input
o LED Low Pressure Monitoring and Alarm
o Dual TDS Monitoring
o Feed flush
* White Powder Coated Aluminum Frame
* Rosedale® 10 Micron Filter Bag
* Rosedale® Bag Filter Housing
* Multi-Cartridge Stainless Steel Filter Housing
* Pulsafeeder® Chemical Injection Pumps with Tanks
* Goulds® Multi-Stage Booster Pump
* AXEON® HF1 Low Energy Membranes
* AXEON® PVC Pressure Vessels
* Digital Flow Meters
* Feed Low Pressure Switch
* Feed Solenoid Valve with Manual Bypass
* Chemical Pump Outlet
* 316 Stainless Steel Concentrate Valve
* 0-300 psi Pump Pressure Gauge
* 0-100 psi Prefilter Pressure Gauges

Options & Upgrades:

* AXEON® HF4 Extra Low Energy Membranes
* AXEON® HF5 Ultra Low Pressure Membranes
* AXEON® NF3 Nanofiltration Membranes
* AXEON® NF4 Nanofiltration Membranes
* Stainless Steel Pressure Vessels
* Fiberglass Pressure Vessles
* Concentrate Recycle Valve with Digital Flow Meter
* Rotrol II Computer Controller Expander Board
* Pump Pressure Relief Valve
* High Pressure Tank Switch
* Blending Valve
* Permeate Sample Ports

 

Surface Water Pond & Lake Water Systems

 

If you have a larger-sized lake home or even a larger summer cottage, this may be the system for you. Surface water presents challenges and we have been treating this type of water for nerly 40 years! You can trust the experts at US Water to have a sustainable solution to your surface water problems.
Benefits:

Call 800-608-8792 | 8AM to 11PM EDT | 7 Days a Week.

Call for More Information To Assure Proper Application of This Product.
We Will Help You Select The Correct Connectors for Your Plumbing.
NOTE: There are Additional Rebates Available on This Product. 

* Clean, clear drinkable, great-tasting water.100-Guaranteed.jpg
* Sustainable technology - built to last for 20 plus years.
* Easy to maintain.
* Bacteria-free water throughout the home.
* Easy to install ("plug-n-play"), easy to service.

Components:

* Stage 1: 3.0 cu/ft Micro-Z Backwashing Filter w/VORTECH Tank (13" diameter x 65" height) - Micro-Z is a high-quality granular, zeolite filter media that replaces conventional sand and multi-media filters. It is produced from a unique mineral deposit having high surface area and porosity. The surface structure of Micro-Z features microscopic mineral projections that allow particulate matter to penetrate deeply into the bed. These properties make Micro-Z an ideal filtration media. Micro-Z removes silt, sand and sediment to below 5 microns in size and backwashes out the accumulated contaminants on a scheduled program.
* Stage 2: Stenner Peristaltic Proportional Chlorine Injection System (Wall Mounted 36" x 23" x 11") with 35 Gallon Chlorine Storage Tank (20.5" diameter x 37.5 height) - Injects the chlorine into the water stream with a peristaltic pump which never requires priming and is dramatically superior to any diaphram pump. The proportional injection system puts the required amount of chlorine into the water regardless of whether the flow rate - it's a "no brainer." Added Feature: The Proportional Injection System has a built-in water meter so that you can monitor water usage.
* Stage 3: (3) 120 Gallon Fiberglass Retention Tank (21" Diameter x 67" height) - Has a built-in bypass valve at the top of the tank and a blow down at the bottom.
* Sage 4: 3.0 cu/ft Granular Activated Coconut Shell Carbon Backwashing Filter (w/VORTECH Tank 13" diameter x 65" height) - Removes the excess chlorine, precipitated matter, tastes, odors, and clairfies the water.
* Stages 5 & 6: Dual-Filtration System (5 Micron & 1 Micron - 18" wide x 26" height - wall mount) - Polishes the water and tighten filtration before ultraviolet disinfection.
* Stage 7: (2) Stainless Steel Ultraviolet Disinfection Systems (41-1/2" x 8-1/2" x 3-3/4" Stainless Steel Disinfection Chamber - wall mount)

Warranty:

* Backwashing Filters - 10 years on tanks/5-years on valve and electronics
* Proportional Injection System - 1 year on all parts
* Chlorine Holding Tank - 5 years
* Retention Tank - 5 years
* UV System - 10 years on SS chamber/1 year on all other parts

Depending upon the water analysis, you may want a water softener and/or a reverse osmosis drinking water system after this system.

Note: It is recommended that you DO NOT USE household bleach in this or any chlorination system. Bleach has dangerous additives which are not for potable water. We suggest using chlorine pellets or granular chlorine (which we sell). When feeding chlorine for a treatment system. The feed rate should be adjusted so that the water coming out of the retention tank has 2 ppm of residual chlorine. This will ensure that the chlorine being fed is at the proper dosage to remove the contaminants.

The chlorine solution should be mixed 2/3 cups of granular or pellet chlorine to every gallon of water. It is preferred that the chlorine solution be made with RO water. If you do not have a reverse osmosis system, you should consider it for no other reason than this. Of course, it will also take your drinking water to an even higher level of purity. The chlorine solution should be made in small amounts (10 gallons or less). This will help keep the chlorine mixture “fresh”.

If 30 gallons of solution is made and it takes longer than a month to use it, it will lose intensity and require constant monitoring of the residual. When it loses intensity it will require an increase in pump dosage to get the 2 ppm residual.

 

frac water solution ZLD zero liquid discharge

mobilized Vapor Compressors provides recycling, reuse and Zero Liquid Discharge (ZLD) for refineries, oil wells, gas wells and other industrial wastewaters.

      zero liquid discharge
      frac water treatment
      gas shale water treatment
      Mobilized Vapor Compressors by Maloney Process Inc. is designed to enable on-site frac water recycling,

 

Vapor Compression Water Distillers
Maloney Process Inc. a California Corporation.
 
Vapor Compression Sugar Recovery for Biofuels
Low operating cost; the most energy efficient vapor compression unit on the market.
Non stick quick release easy clean up.
Distilled water effluent.
Concentrate control up to 18%
 
Compression Brochure (pdf) Distillation Brochure (pdf)

 

 

For more information email sundragonsaltfactory@yahoo.com

Phone 561 271 8131

 

 

 

 

 
 
 
        Index